[1] 潘家华.油气管道断裂力学分析[M].北京:石油工业出版社,1989
[2] Starostinv. Pipeline disaster in the USSR. It had to happen,yet it could have been averted[J]. Pipes Pipelines Int, 1990,35(2):7~8
[3] 李鹤林.天然气输送钢管研究与应用中的几个热点问题[J].中国机械工程,2001,12(3):349~352
[4] 李鹤林,冯耀荣,霍春勇,马秋荣.关于西气东输管线和钢管的若干问题[J].中国冶金,2003,(4):36~40
[5] 李鹤林,油气输送钢管的发展动向与展望[J].焊管, 2004,27(6):1~12
[6] 吉玲康,冯耀荣,李鹤林.螺旋缝埋弧焊管与直缝埋弧焊管对比评价.见:石油管工程应用基础研究论文集[C].北京:石油工业出版社,2001:107~128
[7] Dr.rer.nat.Gerhard Knauf, Ir. Jan Spiekhout. EPRG-30 years in pipeline research[J].3R International. Special Steel Pipelines,2002,41:1~10
[8] API RP1160:Managing system integrity for hazardous liquid pipeline[S]
[9] ASME B31.8S:Standard for managing pipeline system integrity[S],2001
[10] 黄志潜.管道完整性及其管理[J].焊管,2004,27(3):1~8
[11] NACE RP 05-02:Standard for external corrosion direct assessment[S]
[12] NACE RP02-04:Standard for internal corrosion direct assessment[S]
[13] 赵新伟,路民旭,白真权.管线腐蚀剩余强度评价的研究现状及发展趋势[J].石油专用管,1997,5(4):9~14
[14] Kiefner J F, Maxey W A, Eiber R J,et al. Failure stress levels of flaws in pressurized cylinders[R]. ASTM STP 536. Philadelphia:ASTM,1973:461~481
[15] Maxey W A, Kiefner J F, Eiber R J, et al.Ductile fracture initiation, propagation and arrest in cylindrical vessels. Fracture Toughness[R], ASTM STP514. Philadelphia:ASTM, 1972:70~81
[16] NSI/ASME B31G:Manual for determining the remaining strength of corroded pipelines[S],1991
[17] CAN/CSA Z184-M86-1986 Gas pipeline systems[S]. Ottawa,CSA,1986
[18] DNV RP F101-1999 Corroded Pipelines[S].Oslo. DNV,1999
[19] API579:Recommended practice for fitness-forservice[S],2000
[20] Kumar V, German M D, Shih C F. An engineering approach for elastic-plastic fracture analysis[R].EPRI NP-193.Palo Alto:EPRI,1981
[21] Milne I, Ainsworth R A, Dowling A R and Stewart A T. Assessment of the integrity of structures containing defects-CEGB Report R/H/R6-Rev.3[J]. Int. J. Press. Vess. And Piping,1988,32:3~104
[22] ASEM XI IWB-3640 and Appendix H:Flaw evaluation procedures and acceptance criteria for austenic piping[S],1986
[23] ASEM XI IWB-3650 and Appendix C:Flaw evaluation procedures and acceptance criteria for ferritic piping[S],1989
[24] Lu Minxu, Zhao Xinwei, Luo Jinheng. In service oil and gas pipeline integrity assessment practice and progress in China. NACE. The Proceedings of NACE2003[C].NO.3152.Florida,2003
[25] BS 7910:Guide on methods for assessing the acceptability of flaws in fusion welded structures[S],1999
[26] 赵新伟,罗金恒,路民旭,李鹤林等.螺旋焊管焊缝噘嘴应力分析方法.焊接学报[J],2004,25(1):25~28,32
[27] Zhao X W, Luo J H, Zheng M, Li H L.A damage model for assessing the safety of pipeline served in corrosion environments[J]. Metals and Materials International, 2002,8(5):479~485
[28] Zhao X W, Luo J H, Zheng M, Li H L. Elasticplastic collapse of 3-D damaged cylindrical shells subjected to uniform external pressure[J]. Metals and Materials International,2004,10(4):343~349
[29] 赵新伟,罗金恒,路民旭,李鹤林.管线钢断裂韧性和疲劳扩展特性研究[J].石油学报,2003,24(5):108~112
[30] Luo Jinheng, Zhao Xinwei, Xiong Qingren, et al. Defective pipeline fatigue-life prediction using fatigue assessment diagram technique. Paper No.0487. The proceedings of IPC2004[C].Calgary,Canada,2004
[31] 赵新伟,罗金恒,韩晓毅.在役油气管道腐蚀剩余寿命预测方法[J].压力容器,2001,18(2):56~58,42
[32] 赵新伟,罗金恒,路民旭,李鹤林.油气管道适用性评价及软件研究进展[J].压力容器,2002,19(5):30~34 |
