柴达木盆地复杂深井安全钻井技术

doi:10.3969/j.issn.1002-302x.2022.02.009

石油科技论坛 ›› 2022, Vol. 41 ›› Issue (2): 69-73.DOI: 10.3969/j.issn.1002-302x.2022.02.009

柴达木盆地复杂深井安全钻井技术

邢星¹　刘凤和²　程长坤¹　谯世均²　吴玉杰¹　杜宇斌¹　钟原¹

1.中国石油青海油田公司钻采工艺研究院；2.中国石油青海油田公司

出版日期:2022-05-13 发布日期:2022-05-13
作者简介:邢星，1991年生，2017年毕业于中国石油大学（北京）石油与天然气工程专业，硕士，工程师，主要从事钻井工艺研究工作。
基金资助:
中国石油天然气股份有限公司重大科技专项“柴达木盆地建设高原大油气田勘探开发关键技术研究与应用”课题9 “柴达木盆地优快钻井配套工程技术研究及应用”（编号：2016E-0109）

Drilling Safety Technology for Complicated Deep Wells in Qaidam Basin

Xing Xing¹,Liu Fenghe²,Cheng Changkun¹,Qiao Shijun²,Wu Yujie¹,Du Yubin¹,Zhong Yuan¹

1. Drilling and Production Technology Research Institute, PetroChina Qinghai Oilfield Company, Dunhuang 736202, China; 2. PetroChina Qinghai Oilfield Company, Dunhuang 736202, China

Online:2022-05-13 Published:2022-05-13

摘要/Abstract

摘要： 柴达木盆地钻探对象近年来逐渐向深层探索。超深井普遍存在压力系统复杂、地层岩性复杂、储层流体复杂、工程力学复杂等工程地质特征，钻井工程面临着设计优化难、施工风险大、钻井速度慢、工程质量控制难度大等技术问题。通过开展钻井工程方案优化、PDC钻头优选、超高温钻井液及高温水泥浆、高压盐水层安全钻井等研究，初步形成了柴达木盆地复杂深井安全钻井配套技术。现场应用6口井，均顺利完钻，平均井深为6286.6m，钻井周期达236.3天，平均机械钻速为3.15m/h，复杂时效为10.8%，较前期缩短45.6%。昆1-1井7310m井深完钻，创柴达木盆地最深钻井记录。

关键词: 柴达木盆地, 复杂深井, 安全钻井, 超高温, 高压盐水层

Abstract: The drilling targets in Qaidam Basin have gradually extended into deep layers in recent years. Generally speaking, the ultra-deep wells are geologically characterized in complex pressure systems, complex stratigraphical lithology, complex reservoir fluid and complex engineering mechanics. Drilling engineering faces some technological bottlenecks, such as difficult optimization of design, high operational risks, slow drilling speed, and difficulty for engineering quality control. A systematic technology for drilling safety of complicated deep wells in Qaidam Basin was developed thanks to optimization of the drilling engineering plan, optimization of PDC bit, research on ultra-high temperature drilling fluid and high-temperature drilling mud, and high-pressure salt-water layer drilling safety study. The technology was applied to six wells on the field, achieving good results for well completion. The well depth was 6286.6 meters on average and the drilling period reached 236.3 days. The average mechanical drilling speed was 3.15 m/h while the complex timeliness was 10.8 percent, 45.6 percent shorter than the initial stage. Drilling and completion of the 7310-meter-deep Kun 1-1 Well set a record high for well depth in Qaidam Basin.

中图分类号:

TE243

邢星　刘凤和　程长坤　谯世均　吴玉杰　杜宇斌　钟原. 柴达木盆地复杂深井安全钻井技术[J]. 石油科技论坛, 2022, 41(2): 69-73.

Xing Xing, Liu Fenghe, Cheng Changkun, Qiao Shijun, Wu Yujie, Du Yubin, Zhong Yuan. Drilling Safety Technology for Complicated Deep Wells in Qaidam Basin[J]. Petroleum Science and Technology Forum, 2022, 41(2): 69-73.

参考文献

[1]　汪海阁,葛云华,石林.深井超深井钻完井技术现状、挑战和“十三五”发展方向[J].天然气工业,2017,37(4):1-8.
Wang Haige, Ge Yunhua, Shi Lin. Technologies in deep and ultra-deep well drilling: Present status, challenges and future trend in the 13th Five-Year Plan period (2016-2020)[J]. Natural Gas Industry,2017,37(4):1-8.
[2]　王耀稼,王再兴,沈黎阳,等.国内超深井钻井技术现状及发展趋势[J].石化技术,2016,23(2):52.
Wang Yaojia, Wang Zaixing, Shen Liyang, et al. Domestic deep and ultra-deep drilling technology status and development trend[J]. Petrochemical Industry Technology, 2016,23(2):52.
[3]　伍贤柱.川渝气田深井和超深井钻井技术[J].天然气工业,2008, 28(4):9-13.
Wu Xianzhu. Drilling technology in deep and ultra-deep gas wells in the Sichuan and Chongqing gas fields[J]. Natural Gas Industry, 2008,28(4):9-13.
[4]　韩烈祥.川渝地区超深井钻完井技术新进展[J].石油钻采工艺, 2019,41(5):555-561.
Han Liexiang. New progress of drilling and completion technologies for ultra-deep wells in the Sichuan-Chongqing area[J].Oil Drilling & Production Technology, 2019,41(5):555-561.
[5]　孙金声,刘伟. 我国石油工程技术与装备走向高端的发展战略思考与建议[J].石油科技论坛,2021,40(3):43-55.
Sun Jinsheng, Liu Wei. Strategic thinking and suggestions on high-end development of China’s petroleum engineering technology and equipment[J]. Petroleum Science and Technology Forum, 2021, 40(3): 43-55.
[6]　杨沛,刘洪涛,李宁,等．塔里木油田超深井钻井设计及优化技术：以亚洲最深井轮探1井为例[J].中国石油勘探，2021,26(3):126-135.
Yang Pei, Liu Hongtao, Li Ning, et al. Drilling design and optimization technology of ultra-deep wells in the Tarim Oilfield: a case study of well Luntan 1, the deepest well in Asia[J]. China Petroleum Exploration,2021,26(3):126-135.
[7]　孔勇,杨小华,徐江,等.抗高温强封堵防塌钻井液体系研究与应用[J].钻井液与完井液,2016,33(6):17-22.
Kong Yong, Yang Xiaohua, Xu Jiang,et al. Study and application of a high temperature drilling fluid with strong plugging capacity[J].Drilling Fluid & Completion Fluid, 2016,33(6):17-22.
[8]　林永学,杨小华,蔡利山,等.超高密度钻井液技术[J].石油钻探技术,2011,39(6):1-5.
Lin Yongxue, Yang Xiaohua, Cai Lishan, et al. Ultra-high density drilling fluid technology[J].Petroleum Drilling Technology, 2011,39(6):1-5.
[9]　王中华.国内外超高温高密度钻井液技术现状与发展趋势[J].石油钻探技术,2011,39(2):1-7.
Wang Zhonghua. Status and development trend of ultra-high temperature and high density drilling fluid at home and abroad[J]. Petroleum Drilling Technology, 2011,39(2):1-7.
[10] 郑文龙,乌效鸣,朱永宜,等.松科2井特殊钻进工艺下钻井液技术[J].石油钻采工艺,2015,37(3):32-35.
Zheng Wenlong, Wu Xiaoming, Zhu Yongyi, et al. Drilling fluid technique for special drilling technology in SK-2 well[J].Oil Drilling & Production Technology, 2015,37(3):32-35.
[11] 于永金,靳建洲,齐奉忠,等.高温深井固井水泥浆稳定性探讨[J].西部探矿工程,2012(5):18-21.
Yu Yongjin, Jin Jianzhou, Qi Fengzhong, et al. Discussion on the stability of cement slurry of high-tempreature and deep wells[J]. West-China Exploration Engineering, 2012(5)：18-21.
[12] 杨勇,戴建文,林荣壮,等.高温水泥浆沉降稳定性[J].钻井液与完井液,2010,27(6):55-57.
Yang Yong, Dai Jianwen, Lin Rongzhuang, et al. Study on settlement stability of cement slurry in high temperature[J]. Drilling Fluid & Completion Fluid, 2010,27(6):55-57.
[13] 卢甲晗,袁永涛,李国旗,等.油井水泥抗高温抗盐降失水剂的室内研究[J].钻井液与完井液,2005,22(S1):67-68.
Lu Jiahan, Yuan Yongtao, Li Guoqi, et al. Laboratory study on high temperature salt-tolerant fluid loss reducer for oil cement[J].Drilling Fluid & Completion Fluid, 2005,22(S1):67-68.
[14] 杨莉,姚建华,罗平亚,等.钻井液常见污染问题及处理方法探讨[J].钻井液与完井液,2012,29(2):47-50.
Yang Li, Yao Jianhua, Luo Pingya, et al. Discussion on common contamination problems and treatment methods for drilling fluid[J].Drilling Fluid & Completion Fluid, 2012,29(2):47-50.
[15] 李诚,米光勇,高德伟,等.川西地区钻井盐水侵危害机理及其应对措施[J].钻采工艺,2019,42(1):14-16.
Li Cheng, Mi Guangyong, Gao Dewei, et al. Investigation on damage mechanism of combined brine intrusion into wells at western sichuan and countermeasures[J].Drilling & Production Technology, 2019,42(1):14-16.

柴达木盆地复杂深井安全钻井技术

Drilling Safety Technology for Complicated Deep Wells in Qaidam Basin

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

[1]	叶海超. 钻井工程技术现状及发展趋势[J]. 石油科技论坛, 2018, 37(6): 23-31.
[2]	王远, 张娟涛, 尹成先. 13Cr 管材专用超高温酸化缓蚀剂[J]. 石油科技论坛, 2015, 34(增刊): 140-142.