石油科技论坛

石油科技论坛 ›› 2015, Vol. 34 ›› Issue (增刊): 46-48.DOI: 10.3969/j.issn.1002-302x.2015.z1.013

• 成果推介 • 上一篇    下一篇

F-1600HL高压钻井泵

祖慧玲1, 曾兴昌1, 2, 郝建旭1, 2, 何根良1, 周小明1   

  1. 1.中国石油宝鸡集团石油机械有限责任公司;
    2.国家油气钻井装备工程技术研究中心
  • 收稿日期:2015-07-08 出版日期:2015-10-25 发布日期:2015-11-16
  • 基金资助:
    中国石油天然气集团公司科学研究与技术开发项目“高压喷射钻井、井下动力钻具配高效钻头集成应用”（编号：2009D-2409-018）。

F-1600HL High Pressure Drilling Pump

Zu Huiling1, Zeng Xingchang1, 2, Hao Jianxu1, 2, He Genliang1, Zhou Xiaoming1   

  1. 1. CNPC Baoji Oilfield Machinery Co Ltd, Baoji 721002, China;
    2. National Engineering Research Center for Oil & Gas Drilling Equipment, Baoji 721002, China
  • Received:2015-07-08 Online:2015-10-25 Published:2015-11-16
  • Supported by:
     

PDF

摘要： 为了满足深井、超深井、大位移水平井、高压喷射钻井等新型钻井工艺技术的要求,宝鸡石油机械有限责任公司研制了F-1600HL高压钻井泵。该泵最大工作压力为52MPa,为目前国内同功率钻井泵中压力最高,比F-1600钻井泵提高了50.7%,最大排量为51.8L/s,比F-1600钻井泵增加了11.4%。该泵采用“L”形液缸、双金属缸套、带卸载槽的高压阀、耐高温和油基钻井液的高压活塞、缸套内外冷却装置等新结构、新技术,通过结构有限元分析与优化设计、钻井液介质试验等,确保了该泵在高压和大排量工作时的可靠性。目前,该泵已成功用于7000m及其以上钻机中,并为高压喷射等钻井工艺的实施提供了强有力的装备保障。

 

关键词: 钻井泵, 高压, 大排量, 超深井, 高压喷射钻井, 易损件, 寿命

Abstract: F-1600HL high pressure drilling pump is developed to meet the demand of drilling process for deep well, super-deep well, horizontal well with a large displacement and high pressure jet drilling. The maximum discharge pressure of the pump is 52MPa, the highest pressure of the drilling pump with the same power in China at the present time and 50.7 percent higher as compared to F-1600 drilling pump. The maximum flow rate of the pump is 51.8L/s, 11.4 percent higher than F-1600 drilling pump. It adopts new structures and new technologies, such as a L-shaped cylinder, bimetal liner, high-pressure valve seat with stress relief groove, high temperature resistant and OBM resistant high-pressure piston and inner and outer surface of liner cooling installation. The reliability of the drilling pump is ensured owing to structural finite element analysis, optimized design and drilling fluid medium test. Currently, it has been successfully used in the rigs for drilling 7000-meter-deep wells and even deeper wells. This equipment provide powerful support for application of high-pressure jet drilling process.

Key words: drilling pump, high pressure, high flow rate, super-deep well, high pressure jet drilling, expendable items, service life

中图分类号: